-40%
Irritec Perma-Loc Tubing Coupling-Size:3/4"
$ 2.55
- Description
- Size Guide
Description
The Perma-Loc Tubing Coupler is used to connect two sections of the same size polyethylene tubing in a straight line configuration. Keep a few on hand for making repairs.About Drip Depot Perma-Loc Drip Irrigation Fittings:
Perma-Loc fittings and adapters are heavy duty reusable connectors for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The Tubing connectors can be used on blank tubing as well as drip line.
To Use:
Simply push tubing or tape over barbed end, then hand-tighten locking nut over tubing or tape for a permanent secure fit.
To Remove:
Just loosen locking nut, pull tube off and re-use as needed.
Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut which comes off the fitting and slides over the tubing, a Perma-Loc locking nut is usually not removed from the fitting. The exception to this rule might be some of the larger 3/4" and above tubing fittings. Select a video from above to see how the Perma-Loc drip irrigation tubing and tape fittings work.
Perma-Loc Size
Acceptable Inside Tubing Diameter
Acceptable Wall Thickness
3/8"
.510" to .580"
.035" to .055"
1/2"
.590" to .630"
.025" to .050"
3/4"
.790" to .845"
.045" to .065"
1"
1.025" to 1.085"
.045" to .070"